BSV BSPOOL BSsalt-10 Manual De Usuario página 70

3.2.4- ADVANCED kit (Redox) (OPTIONAL in EVO series equipment)
The equipment continuously measures the bactericide level of water through
this probe, by means of a "Redox" probe. Simply adjust the required level and
the equipment automatically maintains the level of disinfection by adjusting the
production of chlorine to the real needs of the swimming pool.
The screen shows the "Redox" level (bactericide capacity) present in the
swimming pool.
The potential RedOx (Reduction Oxidation) or ORP (Oxidation Reduction
Potential) is the electrical voltage that indicates the oxidation capacity or
reduction of a solution. In swimming pools, the oxidation capacity is directly
related to the bactericide power of the water, which is directly related to the
concentration of free chlorine in the pool.
This probe enables you to adjust the equipment in AUTOMATIC operating
mode.
3.2.4.1- Parts
3.2.5- PRO/2 kit (free chlorine) Optional in EVO equipment
The amperometric measurement kit, allows to obtain a ppm free chlorine
Reading from your swimming pool. This sensor is based on a 3-electrode
header, which is separated from the water through a membrane. This ppm
measure has a low dependency of pH and isocyanuric acid, and it can be also
installed in sea water swimming pools (this option to be asked to BSV
Electronic). Please follow carefully the installation, calibration and maintenance
instructions to ensure a perfect setup of the kit.
Manual EVO v.4
REDOX Probe
3- Probe-Holder
4- Flange
4- Reference liquid 465mV.
70 / 166