Sony Caller ID IT-M602 Manual De Instrucciones página 10

Step 2: Setting up the phone (continued)
Connecting a computer or FAX
You can connect a computer or FAX, etc. to the
"DATA" jack.
Notes
• "LINE 2" is used for receiving or sending
computer or FAX data in addition to making
or receiving calls.
If a call comes in on " LINE 2" with the "call waiting" service while a
computer or FAX connected to the "DATA" jack is receiving or
sending data, that data may be effected.
If you have data communication frequently, we recommend that you
and your callers use "LINE 2 "for data communication only.
• If you have only single outlet having one line, connect the telephone
line cord to the "LINE 2" jack.
To tilt the phone
If you want to tilt the phone, attach the supplied wall bracket on the
bottom of the phone.
2
Choose the dialing mode
For the telephone to work properly, select
an appropriate dialing mode (tone or
pulse).
Depending on your dialing system, set the DIAL MODE switch as follows:
If your dialing system is
Tone
Pulse
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
10 EN
Getting Started
1
1
pads
2
3
groove
Wall bracket
Set the switch to
T
P
To "LINE 1/LINE 1+2"
and/or "LINE 2"
Put the four pads into the
hollows of the wall bracket.
Attach the wall bracket to the
telephone.
Connect the telephone line
cord(s) and AC power adaptor
by following the procedure on
page 8 or 9.
DIAL MODE switch
IT-M602
To "DATA"
Computer
or
FAX