Onkyo HTP-678 Manual De Instrucciones página 3

Ocultar thumbs Ver también para HTP-678:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
Caution
• A mounting screw's ability to support a
speaker depends on how well it's
anchored to the wall. If you have
hollow walls, screw each mounting
screw into a stud. If there are no studs,
or the walls are solid, use suitable wall
anchors. Use screws with a head
diameter of 5/16" (8 mm) or less and a shank diameter of
1/8" (4 mm) or less. With hollow walls, use a cable/pipe
detector to check for any power cables or water pipes
before making any holes.
• Leave a gap of between 3/16" (5 mm) and 7/16" (10 mm)
between the wall and the base of the screw head, as
shown (We recommend that you consult a home
installation professional).
Enjoying Home Theater
The Home Theater means that you can enjoy surround
sound with a real sense of movement in your own home —
just like being in a movie theater or concert hall.
1 Front & Height speakers (SKF-693)
These speakers placed with their top diaphragms
Wall
facing toward the ceiling can produce a sound field of
the Dolby Atmos listening mode by providing sounds
echoing off the ceiling. The speakers on the front
output front stereo sound.
2 Center speaker (SKC-591N)
3/16" to 7/16"
This speaker outputs center sounds such as dialogs
(5 to 10 mm)
and vocals.
3 Surround speakers (SKR-590)
These speakers create back sound field.
4 Subwoofer (SKW-658)
The subwoofer reproduces bass sounds and creates
rich sound field.
• Refer to the operating instructions for your AV receiver
and other equipment for details about the placement of
the speakers.
En-3
Connecting the Speakers
Speaker Connection Precautions
Read the following before connecting your speakers:
• Turn off your receiver before making any connections.
• Pay close attention to speaker wiring polarity.
Connect positive (+) terminals to only
positive (+) terminals, and negative (–)
terminals to only negative (–) terminals. If the
speakers are wired incorrectly, the sound will be out of
phase and will sound unnatural.
• Be careful not to short the positive and negative wires.
Doing so may damage your amplifier.
Front & Height
Front & Height
right speaker
left speaker
(Height)
Tan
(Front)
White
Red
Gray
Blue
Green
Center speaker
Surround
Surround
right
left
speaker
speaker
*
Using the supplied RCA cable, connect the subwoofer's LINE
INPUT to your AV receiver's SUBWOOFER jack.
Brown
Powered
subwoofer
loading