Idiomas disponibles
Idiomas disponibles
equipment waste per Directive
2012/19/EU in the European
Union is required. Contact the
manufacturer for details.
Electromagnetic Compatibility
The Sensor needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided in this manual.
Portable and mobile RF communications equipment can a"ect the Sensor.
Use of accessories, transducers and cables other than those specified or
provided by Abbott Diabetes Care could result in increased electromagnetic
emissions or decreased electromagnetic immunity of this equipment and result
in improper operation.
The Sensor should not be used adjacent to or stacked with other equipment and
that if adjacent or stacked use is necessary, the Sensor should be observed to
verify normal operation in the configuration in which it will be used.
Guidance and manufacturer's declaration – electromagnetic
emissions
The Sensor is intended for use in the electromagnetic environment specified
below. The customer or the user of the Sensor should assure that it is used in such
an environment.
Emissions test: RF emissions; CISPR 11
Compliance: Group 1
Electromagnetic environment – guidance: The Sensor uses RF energy only for its
internal function. Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Emissions test: RF emissions; CISPR 11
Compliance: Class B
ART42490-004_rev-A 10:30am 04-May-22
