Idiomas disponibles
Idiomas disponibles
6. Install the filter covers back into place.
First insert the two locking tabs on
the filter cover into the slots in the
air purifier as shown. Make sure both
locking tabs are inserted into place
completely. Then push the upper part of
the filter cover near the air purifier until
it snaps into position. Make sure both
filter covers are installed correctly.
NOTE: The filter covers are attracted by
magnets equipped inside the air purifier.
NOTE: To reduce the risk of electric shock, this air purifier has a polarized plug; one blade
is wider than the other. This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in any way.
1. When using the air purifier, keep it away
from anything that would block airflow,
such as curtains.
2. Plug the power adapter into the outlet.
When powered on, a "Ding" sound will
be heard and the ON/OFF button will
turn red. The air purifier is in the standby
state.
3. Tap the ON/OFF Button to turn on
the air purifier. A "Ding" sound will be
heard. The ON/OFF button will turn
white and the display screen lights up.
The air purifier enters into AUTO mode.
ASSEMBLY INSTRUCTIONS
Locking
Tabs
Slots
OPERATING INSTRUCTIONS
USING THE AIR PURIFIER
7. Insert the power adapter into the power
port on the air purifier.
Power
Port
4. To turn off the air purifier, tap the ON/
OFF button again. A "Ding" sound will
be heard. The ON/OFF button will turn
red and the display screen turns off. The
air purifier enters into the standby state.
Unplug the power cord plug from the
outlet if necessary.
- 9 -
