Fully Automatic Flash Shooting - Canon SPEEDLITE 430EX II Manual De Instrucciones

Fully Automatic Flash Shooting

When you set the camera's shooting mode to <V> (Program AE) or
<U> (Full Auto), E-TTL II/E-TTL fully automatic flash will make it as
easy as normal AE shooting in the <V> and <U> modes.
Maximum effective range
If the lens focal length blinks on the LCD panel, the periphery of the flash
picture may turn out dark. Use the built-in wide panel (p.18).
<a> will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera's ISO speed.
1
Set the Speedlite to <a>.
Press the <D> button so that
<a> is displayed.
When you press the shutter button
halfway, the maximum effective range
(distance) of the flash will be
displayed.
2
Focus the subject.
Press the shutter button halfway to
focus.
The shutter speed and aperture will
be set as displayed in the viewfinder.
Check that the <Q> icon is lit in the
viewfinder.
3
Take the picture.
When you press the shutter button
completely, the flash will fire and the
picture will be taken.
If a standard flash exposure was
obtained, the flash exposure
confirmation lamp (green) will light for
about 3 sec.
11