Home Decorators Collection NORTH LAKE 51418 Guía De Uso Y Mantenimiento página 12

Assembly - Attaching the Fan Blades (continued)
2
Attaching the fan blades
NOTE: Your fan features revolutionary advancements
for quick and easy blade installation.
□
Mount the fan blades (H) to the blade bracket (I) by aligning
the three key-slot holes in the blade (H) with the three posts
on the top of the blade brackets (I).
□
Hold the blade (H) close to the blade bracket (I) and press
the blade (H) down firmly. Ensure the key-slot holes are
properly seated on the blade arm posts.
□
While still holding the blade (H) down, firmly slide the
blade (H) away from the bracket (I) side until the blade
(H) engages in the locking mechanism. Make sure the
locking mechanism (UU) at the rear of the blade bracket (I)
springs upward and butts against the edge of the blade (H)
indicating a secure connection.
□
Visually inspect the top of the blade bracket (I) to ensure the
locking mechanism (UU) is securely in place.
□
Repeat for the remaining blades (H).
Assembly - Attaching the Light Kit
1
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (V V) from the light kit assembly
(G).
□
Connect the wires exiting the bottom of the motor assembly
(F) by connecting the molded adaptor plugs together (blue to
blue, white to white).
□
Slide the light kit assembly (G) up and secure it to the
switch housing using the three screws (V V) that were
removed in the first step.
I
UU
12
H
F
V V
G
F