UFESA NYASSA Manual De Instrucciones página 16

EN
ling. Ensure that the lid is firmly in place before plugging the power outlet.
3. Close the lid until it locks and place the kettle on the base (6).
4. Press down the on/off switch (5), the water level indicator (1) lights up. The kettle will start to boil
water, once the water has been boiled the on/off switch (5) will be off automatically. You can shut
off the power by lifting the on/off switch (5) at any moment during boiling water. If you want to
boil water again, only press down the on/off switch (5) directly to restart the kettle.
NOTE: Only operate the kettle with the lid closed.
5. Lift the kettle from the power base (6) and then pour the water.
6. The kettle will not re-boil until the on/off switch (5) is pressed down again. The kettle may be
stored on the power base when not in use.
NOTE: After boiling, let the kettle cool down for 5 minutes before refilling it with water.
WARNING: If you remove the kettle from the base and replace it before the heating process is over,
the kettle will continue to heat the water.
Do not turn on the appliance if the kettle is empty, otherwise the overheat control will engage and
the appliance will switch itself on automatically.
BOIL DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry protection will automa-
tically switch off the power. If this occurs, allow the kettle to cool before filling with cold water to
re-boil.
CLEANING AND MAINTENANCE
1. Do not forget to remove the plug from the socket before cleaning the appliance.
2. Wipe outside with soft dry cloth when the kettle is wet, never use metal polish.
3. Never use a dishwasher to clean any parts from the machine.
4. Rinse the kettle with clear water.
5. Put the water kettle in a dry and not very hot place.
6. Filter cleaning: remove out the scale filter (4) and rinse it under tap water.
DESCALING
Regular descaling makes your kettle last longer, ensures proper function and saves energy.
Descale the kettle with vinegar or a commercial descaling agent.
Fill the kettle with water up to the max mark and bring to a boil. Next add a small amount of white
vinegar and let it sit for a couple of hours. You can also use a commercial descaling product and
follow the manufacturer's instruction. Rinse the kettle with clear water.
If you use the kettle daily, descale more frequently.
16