Worx WX333 Manual De Instrucciones página 9

TECHNICAL DATA
Type WX333 WX333.X (330~359-designation of
machinery, representative of Rotary hammer)
Voltage
Power input
No load speed
Impact rate
Impact energy
Chuck type
Steel
Max. drilling
Wood
capacity
Concrete
Protection class
Machine weight
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax cover sum) determined
according to EN60745:
Rotary hammer
WX333 WX333.X **
220-240V~50/60Hz
1250W
0-750/min
0-3700/min
5.0J
SDS-plus
13mm
32mm
40mm
/II
6.1kg
L = 90 dB(A)
pA
L = 101 dB(A)
wA
3.0 dB(A)
Vibration emission value
Hammer drilling
a
h,HD
into concrete
Uncertainty K = 1.5 m/s
Vibration emission value
a
Chiseling
h,CHeq
Uncertainty K = 1.5 m/s
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
=17.4 m/s
2
2
= 14.3 m/s
2
2
EN
9