SICK WSE26P Instrucciones De Uso página 29

5 Electrical installation
8020358.1GI9/2022-07-13 | SICK
Subject to change without notice
Dimensions in mm (inch)
400
(15.75)
200
(7.87)
0
–200
(–7.87)
–400
(–15.75)
0 10 20 30
(32.81) (65.62) (98.43)
Recommended sensing range for the best
performance
Figure 3: WSE26I light spot size
Dimensions in mm (inch)
1,400
(55.12)
700
(27.56)
0
–700
(–27.56)
–1,400
(–55.12) 0 20 40 60
(65.62) (131.23) (196.85)
Recommended sensing range for the best
performance
Figure 4: WSE26G light spot size
Note the sensor's maximum permissible tightening torque of < 1,3 Nm.
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
– Male connector connection: Note pin assignment
– Cable: wire color
Only supply/switch on the voltage once all electrical connections have been estab‐
lished.
Explanations of the connection diagram (following tables):
Alarm = alarm output
Health = alarm output
MF (pin 2 configuration) = external input, teach-in, switching signal
Q /C = switching output, IO-Link communication
L1
Test = test input
40 50 60
(131.21) (164.04) (196.85)
Distance in m (feet)
80 100 120
(262.47) (328.08) (393.70)
Distance in m (feet)
O P E R A T I N G I N S T R U C T I O N S | WSE26
OPERATING INSTRUCTIONS
15
5 40 120
(16.40) (131.23) (393.70)
60
en
29