Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DON'Ts
NEVER VIOLATE THE FOLLOWING RULES TO ASSURE SAFE USE OF THIS TOOL:
1.
Never operate the POWER TOOL unless you fully understand the operating instructions
contained in this Manual.
2.
Never leave the POWER TOOL unattended without fi rst unplugging the power cord.
3.
Never operate the POWER TOOL when you are tired, after you have taken any medications,
or have consumed any alcoholic beverages.
4.
Never use the POWER TOOL for applications not specifi ed in the instruction manual.
5.
Never operate the tool while wearing loose clothing, a necktie or jewelry, or while your hair
is uncovered, to protect against getting caught in the moving machinery.
6.
Never reach around the saw blade.
7.
Never touch any moving parts, including the blade, while the saw is in use.
8.
Never remove any safety devices or blade guards; use of the tool without them would be
hazardous.
9.
Never lock the lower guard; always confi rm that it slides smoothly before using the tool.
10. Never damage the power cord of the tool.
11. Never attempt to move a plugged-in POWER TOOL while your fi nger is on the starting
switch.
12. Never use the POWER TOOL if the starting switch does not turn on and off properly.
13. Never use the POWER TOOL if the plastic housing or the handle is cracked or deformed.
14. Never use the POWER TOOL near fl ammable liquids or gases because sparking can cause
an explosion.
15. Never clean plastic components with solvents because the plastic may dissolve.
16. Never operate the saw unless all the blade guards are in place.
17. Never raise the saw blade from the workpiece until it has fi rst come to a complete stop.
18. When slide cutting, never pull the handle toward the operator, since this could cause the
saw blade to kick up from the workpiece. Always push the handle away from the operator in
a single, smooth motion.
19. Never place your limbs inside of the line next to warning sign "
operated. This may cause hazardous conditions.
20. Never use abrasive type blades on this saw.
21. Never expose to rain or use in damp locations.
22. Never cut ferrous metals or masonry.
WARNING
FOR YOUR OWN SAFETY READ THIS INSTRUCTION MANUAL BEFORE OPERATING
THE SLIDE COMPOUND MITER SAW
1.
Always wear eye protection when using the slide compound miter saw.
2.
Always keep hands out of the path of the saw blade.
3.
Never operate the saw without the guards in place.
4.
Never perform any freehand operation with the slide compound miter saw.
5.
Never reach around the saw blade.
English
" while the tool is being
7
Tabla de contenido
