Probuilder 69361 Manual De Instrucciones página 50

daily, as well as any condensation in the
air lines.
Water in the air line may enter the tool
and damage the tool mechanisms at
operation.
Clean the air inlet filter cartridge weekly.
The recommended hook-up procedure
can be viewed in the said diagram.
Line pressure should be increased
accordingly to make up for extra long
air hoses (usually over 8 meters). The
minimum hose diameter should be
1/4 in.(inner diameter) and the �� ttings
should have the same inside dimensions.
But usually a 3/8 in. I.D. air hose is
recommended for air supply to get the
best function of air tool operation.
Use proper hoses and fittings. We do
not suggest connecting quick change
couplings directly to the tool since
they may cause failure due to vibration.
Instead, add a leader hose and connect
coupling between air supply and hose
whip.
Check hoses for wear before individual
use.
Make certain that all connections are
secured.
Important!
Working pressure refers to the air line
pressure set to the tool when the tool is
1
AIR SYSTEM LAYOUT:
1. Air Tool
2. Air Hose (3/8" I.D.)
3. Oiler
4. Pressure Regulator
5. Filter
6. Shut Off Valve
7. Whip Hose
under working conditions (i.e. the tool has
been started). It does NOT refer to the air
pressure from air compressor.
An air hose (3/8" x 50 ft. air hose is the
most common one in stores) may cause
up to 15 PSI drop in pressure from the
air compressor to the tool, so you may
need to set the output air pressure of
compressor higher to maintain the
required pressure at the tool.
An individual air tool has its specification
of air consumption (CFM). Check the
specifications of your compressor to be
sure that it can support both minimum
CFM (cubic feet per minute) and PSI
(pounds per square inch) required.
PREPARATION
Before beginning assembly or operation
of the product, make sure that all parts
are present. Compare the parts with
the package contents list. If any part is
missing or damaged, do not attempt to
assemble, install or operate the product.
Contact the distributor or sales agent for
replacement.
8. Coupler Body And Connector
9. Drain Daily
10. 1/2" Or Larger Pipe And Fitting
11. Air Dryer
12. 1" Or Larger Pipe And Fitting
13. Air Compressor
14. Auto Drain
15. Drain Daily
50