Idiomas disponibles
Idiomas disponibles
Pneumatic Die Grinder
INTRODUCTION
To get the most out of your new product, please read this manual before use. Please
also save the manual in case you need to refer to it at a later date.
TECHNICAL DATA
Capacity:
Free speed:
Average air consumption:
Required air pressure:
Air inlet:
Air hose:
Overall length:
Net weight:
SAFETY INFORMATION
Please read and understand this entire
manual before attempting to assemble,
operate or install the product. If you have
any questions regarding the product,
please contact the distributor or sales
agent.
WARNING! IMPROPER OPERATION
OR MAINTENANCE OF THIS PRODUCT
COULD RESULT IN SERIOUS INJURY
AND PROPERTY DAMAGE. READ AND
UNDERSTAND ALL WARNINGS AND
OPERATION INSTRUCTIONS BEFORE
USING THIS EQUIPMENT. WHEN USING
AIR TOOLS,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED TO REDUCE THE
RISK OF PERSONAL INJURY.
WARNING! RISK OF EYE OR HEAD
INJURY
Air powered equipment and power tools
are capable of propelling materials such
as fasteners, metal chips, sawdust and
other debris at high speed which could
result in serious eye injury.
Always wear approved safety glasses with
side shields.
Never leave operating tool unattached.
Disconnect air hose when tool is not in use.
Compressed air can be hazardous. The
air system can cause injury to soft tissue
areas such as eyes, ears, etc. Particles or
1/4 IN. (6 mm)
22,000 RPM
4.5 CFM
90 PSI (6.3 BAR)
1/4 IN.
3/8 IN. (inside diameter)
6.62 IN. (168 mm)
0.6 kgS (1.30 LBS)
objects propelled by the stream can cause
injury.
For additional protection use an approved
face shield in addition to safety glasses.
Tool attachments can become loose or
break and fly apart propelling articles at
the operator and others in the work area.
Make sure that any attachments are
securely assembled.
WARNING! RISK OF FIRE OR EXPLOSION
Abrasive tools such as sanders and
grinders, rotating tools such as drills, and
impact tools such as nailers, staplers,
wrenches, hammers and reciprocating
saws are capable of generating sparks,
which could result in ignition of
flammable materials.
Never operate tools near flammable
substances such as gasoline, naphtha,
cleaning solvents, etc.
Work in a clean, well-ventilated area free
of combustible materials.
Never use oxygen, carbon dioxide or
other bottled gases as a power source for
air tools.
Exceeding the maximum pressure rating
of tools or accessories could cause an
explosion resulting in serious injury.
Use compressed air regulated to a
maximum pressure at or below the rated
pressure of any attachments.
Never connect to an air source that is
capable of exceeding 200 psi.
Always verify prior to using the tools that
the air source has been adjusted to the
rated air pressure range.
WARNING! RISK OF LOSS OF HEARING
Long term exposure to noise produced
from the operation of air tools can lead to
permanent hearing loss.
Always wear approved hearing protection.
47
GB
