Idiomas disponibles
Idiomas disponibles
REAR PANEL
1. AC CORD Plug this cord into the powersupply socket. Before using a power amplifier,
check if the input voltagein accordance with the machine voltage.
2. FUSE Protect your amplifier from AC problems. If the power amplifier is "on" and nothing
lights, please verify the fuse compartment. If fuse is broken, please read it and change
with a new one of same size and value.
3. INPUT CONNECTOR XLR balanced input
4. PARALLEL / OUTPUT CONNECTORS XLR balanced output, use this output to connect to
another amplifier system.
5. NL4MP CONNECTORS OUTPUT Speakers stereo connection 1+, 1-, bridge connection
CH1 + 2. Note: this product design minimum output impedance 4Ω, please don't drive
nominal less than 4Ω loudspeaker loads, this may cause amplifier don't work properlyor
averheating.
6. WAY BINDING POST CONNECTORS Output connection speaker.
7. COOLING FAN Turn on the power to the amplifier, the cooling fun runs in dust removal
mode at highspeed for 3 seconds, then enters idle speed, as the operating temperature
rises the cooling fan speed becomes higher.
4
