Idiomas disponibles
Idiomas disponibles
Your vacuum cleaner is equipped with a secondary
filter and a Final filter. These filters capture fine
dust particles and protect the motor from dirt.
Accumulated dirt in the bag compartment will
be collected on the filters and may restrict motor
performance. It is important to change the filters
regularly — approximately once a year or as
needed.
How to Change the Secondary Filter
1. Unplug the vacuum cleaner. Remove the bag
compartment cover and remove the vacuum
bag.
2. Remove the secondary filter by sliding it out
from under the bag supporter
3. Insert a new filter, replace the bag and bag
compartment cover.
How to Change the Final Filter
1. Unplug the vacuum cleaner. Remove the filter
cover below the dust compartment cover
(Fig. 2).
2. Remove the filter from the front of the vacuum
(Fig. 3).
3. Vacuum or brush off any dirt on the filter.
If needed, foam filter can be rinsed with warm
water to clean. Allow the filter to air dry for 24
hours before re-installing in the vacuum.
(Fig. 1).
MAINTENANCE
Fig. 1
Fig. 2
Fig. 3
11
