Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Full Bag Indicator
The full bag indicator is designed to show when the
bag is full or when there is a clog in the vacuum.
• If the red indicator
• Change the vacuum bag
• If the vacuum bag is not full, but the full bag
indicator is red, check the hose for a clog.
• When cleaning with a tool (dusting brush or
crevice tool), the red indicator may appear.
In this case, continue cleaning.
Always operate the vacuum cleaner with a vacuum bag installed.
Bags should be changed when they are 2/3 full.
How to Change the Vacuum Bag
1. Unplug the vacuum cleaner. Remove
the bag compartment cover
2. Remove the bag from the bag holder
by grasping the sides of the bag
collar and pulling straight off. Attach
a new vacuum bag by pushing the
collar onto the inlet
3. Pull out the bottom corners of the
new vacuum bag to expand the bag
capacity
(Fig. 3).
4. Reinsert the tab on the end of the
bag compartment cover into the
groove on the bag compartment
housing. Press the bag compartment
cover into place, closing it tightly.
appears:
(Fig. 1)
(Fig. 1).
(Fig. 2).
Fig. 1
Fig. 1
Fig. 3
Fig. 2
10
