Idiomas disponibles
Idiomas disponibles
INSTALLING THE WASHING MACHINE UNDER A KITCHEN
4
WORKTOP AND PRE-CLEANING
INSTALLATION UNDER
Your washing machine may be fitted
underneath a kitchen worktop.
If you need to remove the washing machine's
worktop, for safety reasons you need to fit a
protection plate which you can obtain from
your Dealer or Technical Assistance Service.
Follow these steps to fit the plate:
a Remove the washing machine work top
by taking out the side screws and moving
it gently back.
b Take out the screws and remove the
parts holding the worktop in place.
c Put the protection plate into place and
screw it to the washing machine so it
can then be inserted in the place you
wish, fitting spongy adhesive all around
the perimeter first to prevent noise.
When your washing machine has been
correctly installed, we recommend that you
pre-clean the machine.
This is to check that the installation, the
connections and the drainage are all correct,
and to thoroughly clean the inside of the
washing machine before any wash
programmes are run (see the operating
instructions on the following pages).
a Press ON/OFF button.
b Select the normal programme at 60ºC.
c Press the start/pause button.
All manuals and user guides at all-guides.com
A WORKTOP
PRE-CLEANING
a
b
c
a
b
c
75
