Sima STG 45 Manual De Instrucciones página 24

Idiomas disponibles

Idiomas disponibles

7. HOW TO USE
7.1 LOADING THE WIRE COIL
Press the release lever till it is caught by the release
stopper, so as to open the feeding gears and insert the
wire.
1
Once wire coil is loaded lock the reel stay door back
again.
3
3
Push the release stopper to unlock the release lever,
make sure the release lever is back to original position
and the feeding gears are clamping the wire.
5
Unlock the reel stopper to open the reel stay door and
load the wire coil.
2
2
Insert the tip of the wire into the wire guide, through
the gap of the feeding gears till the pipe and all the way
into the machine upper jaw arm A (max. 70mm).
4
Switch on the tool by pressing the main switch to po-
sition 1, the machine is ready to use.
6
ENG
9
loading