Assembly - Hanging the Fan (continued)
5
Wiring the receiver to the
household wiring
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: Each wire nut supplied with this fan is designed
to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring
or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (AA) supplied with
your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
□
Spread the wires apart so that the green and white wires
are on one side of the outlet box and the black wire is on the
other side.
□
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (AA).
□
Connect the receiver (H) black or red wire to the household
black (hot) wire using a wire connecting nut (AA).
□
Connect the receiver (H) white wire to the household white
wire (neutral) using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
AA (x3)
Black
Black or Red
Receiver
Antenna
ON DIP
1 2 3 4
Receiver (H)
Outlet Box
Green (or Bare)
White
Green
6
Wiring the fan to the receiver
NOTE: The fan comes with 8 in. lead wires for use with the
provided 6 in. ball/downrod assembly (B). If you wish to use a
longer downrod, you can use the extension lead wire (42 in.) (J)
provided.
□
If using the 6 in. ball/downrod assembly (B) provided, wire
the receiver to the fan wires by connecting the molded
adaptor plug from receiver (H) with molded adaptor of the
fan motor assembly (E) together.
□
If you wish to use longer downrod, you can use the
extension lead wire (42 in.) (J) provided by connecting the
molded adaptor together.
H
ON DIP
1 2 3 4
10
Outlet box
in the ceiling
Green
J