Holmatro GCU 50 i EVO 3 Manual página 46

EN
8.5.5 Blades
See Fig. 10.
• Check the blades for damage. Have a Holmatro Certified Technician replace the blades when they
are damaged or the blade tips are damaged or worn.
• Check whether the blades are straight. Have a Holmatro Certified Technician replace the blades if
there is more than 0.6 mm (C) separation.
8.5.6 Centre bolt
See Fig. 10
• Check that the tightening torque of the centre bolt (B) is 50 Nm.
• Spray Teflon lubricating oil on and between the moving parts of the centre bolt (B) while the tool is
opening and closing.
CAUTION
The centre bolt may not be removed. Contact a Holmatro Certified Technician.
8.5.7 Hinge pins
See Fig. 10.
• Spray Teflon lubricating oil on and between the moving parts of the hinge pins (A) while the tool is
opening and closing.
WARNING
The hinge pins may not be removed.
8.5.8 Snap rings of hinge pins
See Fig. 10.
• Check that the snap rings of the hinge pins (A) are present and are not damaged.
Have a Holmatro Certified Technician mount a new snap ring if it is missing or damaged.
8.6 Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.7 Packaging
In many regulations such as IATA (air), ADR (road) and IMO (sea), Li-Ion battery packs are considered
as dangerous goods. Please make sure that the goods are packed and transported in accordance with
the latest regulations. Consult your Holmatro dealer for detailed instructions.
8.8 Storage
8.8.1 Temporary storage
• Store the tool and the battery pack in a dry and well-ventilated dust-free area.
• Fasten the tool so it can not fall over to prevent oil leaking.
• Place the blade tips over each other to prevent injury. Do not fully close the spreading arms / blades
so that the tool can be stored without pressure.
• Check that the on/off switch is OFF.
• Apply a thin coat of preservative oil to the external steel parts.
46
All manuals and user guides at all-guides.com
916.001.652_002 GCU 50* (i) EVO 3