EN
•
Never couple or uncouple couplers while the system is under pressure.
•
Use only genuine Holmatro accessories and ensure that they have been attached correctly.
•
Make sure that parts of the body never come between moving parts. There is a risk that parts of the
body may be crushed or cut.
•
Make sure that the deadman's handle does not become jammed.
•
Stop immediately if the system makes strange noises or displays aberrant behavior.
•
Stop immediately if the equipment leaks oil. Oil escaping under pressure can penetrate the skin and
cause serious injury. Go immediately to a hospital with a person who is injected with oil for medical
help. Give a specification of the oil to the medical staff.
•
Return inactive equipment immediately to the tool station.
•
Always adhere to the safety regulations that apply to other equipment that is used in the operation.
2.11
Safety regulations with respect to maintenance
•
Wear personal means of protection when performing maintenance tasks.
•
Never work in a way that could jeopardize safety.
•
Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
•
Make sure that moving parts do not move unexpectedly.
•
Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in an environmentally responsible way.
3
Description
3.1
Equipment
The cutter is one of the pieces of rescue equipment that makes it possible to reach victims. The cutter is
used during rescue operations to cut through structural elements without removing certain sections. It
can also notch material at particular places in order to weaken the construction. On the front of the tool
there are two blades that make a scissor movement. The high hydraulic pressure that is used means
that this tool can apply large forces.
The cutter is produced as a hand tool that can be operated by one person. The tool can be used
independently because of the battery-driven hydraulic system.
3.2
Type designation
Example: GCU 5030 i CL EVO 3
/i
Digit
Example
1-3
GCU
4-7
5030
8
i
9-10
CL
11-14
EVO 3
3.3
Product identification
See Fig. 2.
34
All manuals and user guides at all-guides.com
Description
G = Greenline
CU = Cutter
Type indication
inclined
Compact Light
EVO 3 series
916.001.652_002
GCU 50* (i) EVO 3