Home Decorators Collection 52-VAGN Guía De Uso Y Mantenimiento página 7

Assembly - Standard Ceiling Mount
1
Preparation for standard mounting
□
Remove the canopy bottom cover (EE) from the canopy (C) by
turning the bottom cover counterclockwise until it unlocks.
□
Loosen the two canopy screws (DD) located in the bottom of the
mounting bracket (A), and turn the canopy counterclockwise to
remove the mounting bracket (A) from canopy (C).
3
Assembling the fan
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(GG) must be completely tightened.
NOTE: This fan is equipped with a safety tab (HH).
Should the setscrew (GG) ever become loose while
the fan is running in reverse, the safety tab (HH) will
engage and stop the fan from falling.
□
Loosen, but do not remove, the setscrew (GG) on the collar
(FF) on top of the fan-motor assembly (E).
□
Install the downrod (B) by inserting it into the motor collar
(FF), and turning it clockwise until it is tight.
□
Re-tighten the setscrew (GG) on the collar (FF) on top of the
fan motor assembly (E).
2
Routing the wires
□
Route the wires exiting the top of the fan motor assembly
(E) through the decorative motor collar cover (D) and then
the center of the canopy bottom cover (EE).
□
Make sure the opening of canopy (C) is on top and insert
the ball/downrod (B) through the canopy (C).
□
Route the wires exiting the top of the fan motor assembly
(E) through the downrod as shown.
A
DD
C
EE
7
GG
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
C
EE
D
B
E
B
FF
HH
E