Grounding Instructions; Machine Components - Tennant V-WD-24P Manual Del Operador

EN

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should
malfunction or breakdown, grounding provi-
des a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This
appliance is equipped with a cord having an
equipment-grounding conductor and groun-
ding plug. The plug must be inserted into an
appropriate outlet that is properly installed
and grounded in accordance with all local co-
des and ordinances.
Grounded
3 Hole Outlet
Grounding Pin
WARNING - Improper connection of
the equipment-grounding conductor
can result in a risk of electric shock.
Check with a qualified electrician or service
person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the
plug provided with the appliance. If it will not fit
the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120
volt circuit and has a grounding attachment
plug that looks like the plug illustrated above.
Make sure that the appliance is connected to
an outlet having the same configuration as the
plug. No adaptor should be used with this ap-
pliance.
WARNING - The replacement or re-
pair of damaged wiring should only be
performed by a qualified electrician or service
engineer from the original distributor or autho-
rized service agent.
6 TENNANT V-WD-24P

MACHINE COMPONENTS

A - Motor head
B - Switched receptacle
C - Latches
D - Inlet
E - Tank
F - Pump and float switch cords
G - Castor wheels
H - Power cord
I - Tank drain hose
J - Camlock coupling (for pump drain hose)
K - Brass nipple with GHT (garden hose
thread - for pump drain hose)
L - Hose fitting (for pump drain hose)
M - Motor on/off switch (red)
N - Pump on/off switch (green)
O - Sump pump
P - Pump float switch
Q - Float valve
R - Vacuum hose
S - Extension cord
T - Cord restraint hook
U - Wand Handle Clip
V - Squeegee floor tool
W - Two-piece wand
X - Hose nozzle
Y - Cord storage hooks
OPTIONAL DRY VACUUM KIT:
1 - Filter holder ring
2 - Filter cartridge
3 - Filter holder
4 - DFS (double filtration system)
5 - Microfiber bag
6 - Crevice tool
7 - Round brush
8 - Tool adaptor
9 - Brush floor tool
OPTIONAL SQUEEGEE ATTACHMENT KIT:
10 - Squeegee attachment
OPTIONAL DISCHARGE HOSE KIT :
11 - Pump discharge hose (10 m)