Night Mode; Uv Light; Changing The Filter Pack - Beurer LR 500 Instrucciones De Uso

6.6 Night mode

The air purifier has a night mode in which it operates extremely quietly and all light sources are switched off.
1. Press the night mode button "
is lit up on the operating panel. When the night mode is activated, the display and the colour ambient air
quality indicator on the base of the housing automatically switch off after 5 seconds.
2. Press the night mode button "
Using the "beurer FreshHome" app, the UV light can be switched on and a timer can be set in night
mode operation.

6.7 UV light

The UV light eliminates germs contained in the air. Here the UV light activates titanium oxides that break down
foul-smelling odour molecules (caused by tobacco smoke, cooking smells or animals).
1. To switch on the UV light , press the UV button "
UV light is active, UV lights up in the display.
2. Press the UV button "

6.8 Changing the filter pack

The three-layered filter should be replaced with a new one after 4320 operating hours. FILTER appears in
the display after 4320 operating hours.
To change the filter, proceed as follows:
1. Press the ON/OFF button to switch off the air
purifier, and unplug it from the socket.
3. To remove the filter pack, pull carefully on the
side tabs.
" to switch on night mode on the device. The night mode symbol "
" again to switch off night mode.
" again to switch off the UV light.
" on the air purifier while it is switched on. Once the
2. Remove the housing cover as shown (magnetic
fastening). First detach the magnetic fastening
at the top, and then at the bottom.
4. Insert a new filter pack. To insert the filter pack
correctly, align it with the side tabs as shown.
21
"