Idiomas disponibles
Idiomas disponibles
24
Only
dehumidification
25
Mode
26
38
Make sure that the flexible duct which joins the
two units has not been squashed or been
trapped in any way. The difference in height
between the two units should not exceed 1.5 m.
Fig. 7.
When the appliance is set to this mode, it only
reduces the amount of humidity present in the air.
The temperature cannot be regulated. The
appliance is capable of extracting up to 50 litres of
water a day from the air depending on atmospheric
conditions.
Release the water from the outdoor unit by
removing the plug from the lower tray.
Place the outdoor unit in the room that you wish
to dehumidify.
Connect the water drainage pipe to the drainage
nozzle on the outdoor unit and use a suitable
receptacle to collect the condensed water in,
Fig. 25.
Turn the appliance on using the "On/Off" button.
Select the "Dehumidification" function
Fig. 26.
When set to this function, the temperature on the
display screen is set at "18°C". Should room
temperature go down below 18°C, the appliance
will not work.
Warning!
When you change back to the "Cooling"
function, put the plug back into the drainage
nozzle on the outdoor unit. Should you fail to
do so, the appliance will shed water produced
by condensation during the cooling process.
Always remember that in order for the
dehumidification function to work properly,
ambient temperature must be at least 18°C.
.
