Stihl KM 85 Manual De Instrucciones página 6

Proper Clothing
!
Warning!
To reduce the risk of injury, the operator
should wear proper protective apparel.
!
Warning!
To reduce the risk of injury
to your eyes never
operate a power tool
unless wearing goggles or
properly fitted safety
glasses with adequate top
and side protection complying with ANSI
Z 87.1 (or your applicable national
standard).
!
Warning!
CombiEngine noise may
damage your hearing.
Wear sound barriers (ear
plugs or ear mufflers) to
protect your hearing.
Continual and regular
users should have their hearing checked
regularly.
For further instructions on proper
clothing see the Safety Instructions in
the owner's manual of the CombiTool.
KM 85, KM 85 R
THE POWER TOOL
For illustrations and definitions of the
power tool parts see the chapter on
"Parts and Controls".
!
Warning!
Never modify a power tool in any way.
Only CombiTools supplied by STIHL or
expressly approved by STIHL for use
with the specific STIHL CombiEngine
models are authorized. Although certain
unauthorized attachments may be
useable on the STIHL CombiEngine,
their use may, in fact, be extremely
dangerous.
THE USE OF THE POWER TOOL
Transporting the power tool
!
Warning!
Always turn off the engine and make
sure the working tool has stopped before
putting a power tool down. When
transporting your power tool in a vehicle,
properly secure it to prevent turnover,
fuel spillage and damage to the power
tool.
english / USA
Preparation for the use of the power
tool
Always check your power tool for proper
condition and operation before starting,
particularly the throttle trigger, throttle
trigger interlock (if applicable), stop
switch, working tool, deflector and
harness.
The throttle trigger must move freely and
always spring back to the idle position.
The working tool must be properly
tightened and in safe operating
condition. Inspect for loose parts (nuts,
screws, etc.) and for cracked, bent,
warped or damaged working tools.
5