Byron DIC-24102 Manual De Usuario página 10

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
Instruction manual
B. Press the video icon and confirm to format the MicroSD card (not
included).
5.5.7 Date and time settings
A. Select the desired field to change.
B. Press the arrow keys up or down until the desired value is shown.
5.5.8 Ringtone and volume
The ringtone melody and volume can be adjusted using the arrow
keys. The settings include:
Volume
Ringtone melody
6
Frequently asked questions
Problem
Monitor does not switch on.
Monitor is switched on but no
image is displayed.
10
Solution
Make sure that the monitor is
connected to the power
source.
Do not use extension cords,
as the voltage might not be
sufficient to power on the
device.
Check the wire connections
between the outdoor unit and
the monitor (including the
correct polarity).
The picture quality is not
good.
The volume is too low.
Connected gate opener does
not work.
Connected gate opener and
electric strike does not work.
Video and audio signal is too
weak or with interference
Adjust brightness and
contrast in settings menu.
Make sure there is no direct
light source pointed at the
monitor.
Adjust the volume
Test the installation and the
12 V relay using wired
control. Refer to the
instruction manual of the gate
opener.
Use suitable accessories with
12 V, 500 mA specification.
Only install lock having a
mechanical storage system.
The monitor is installed too
close to other electronic
devices. Move other electrical
devices away.
Please check the distance
between indoor unit with
outdoor unit, and also check
the thickness of the cables
used,
loading