Assembling The Trimmer - Toro 51487 Manual Del Operador

2

Assembling the Trimmer

No Parts Required
Procedure
1. Remove the tape and the tube from the lower pole (Figure 2).
1. Tube
2. Tape
2. Slide the upper pole into the lower pole, lining up the tabs
in the upper pole with the receiving tabs in the lower pole,
and secure it by tightening the screw.
Note: There is an audible click when the upper pole and
lower pole are in the proper position.
1. Upper pole
2. Screw
Figure 2
3. Lower pole
Figure 3
3. Receiving tabs
3. Cut the zip-tie and remove it from the trigger handle
(Figure 4).
1. Zip-tie
6
Figure 4