Idiomas disponibles
Idiomas disponibles
All modes except for point operation can be selected both with and
without automatic levelling.
Working with Automatic Levelling
On/Off switch 2 in position
"
"
Press button for "line &
point" operating mode
6 once
Press button for "line &
point" operating mode
6 twice
Press button for "line &
point" operating mode
6 three times
Press button for "line &
point" operating mode
6 four times
If the measuring tool is outside of the self-levelling range, the laser
lines and/or points will flash quickly.
If during work with automatic levelling you switch to the "working with-
out automatic levelling" mode (On/Off switch 2 in position "
first combination of this mode's indicators is always activated.
●
●
Cross-line
●
operation
●
—
—
—
●
—
—
—
●
●
●
Cross-line
●
operation
-19-
green
B1
green
C1
green
D1
green
E1
green
B1
"), the
