Idiomas disponibles
Idiomas disponibles
Operation
(Continued)
• Save all instructions
J
Tilling Tips
• Tilling depth will vary with ground conditions.
• When beginning to till in unbroken ground or in extremely
hard soil, set the pin in the highest hole of the drag bar
(follow instructions under Tilling section). This will allow
for shallow tilling. With the drag stake in this position,
make several light passes over the area to be tilled. Reset
for deeper depths with successive passes.
• If tiller jumps or skids uncontrollably, lower the drag
stake by placing the pin in a higher hole. This will allow
for shallower tilling. Hold firmly to the handlebars to
control sudden lurches.
• If weeds, tall grasses, vines, or other materials clog or
jam the tines, reverse the tiller to unwind vegetation.
WARNING
Immediately release the clutch lever if the tines jam or you
strike a foreign object. With clutch lever in neutral position,
stop the engine. Disengage the spark plug wire. When
tines have stopped, remove foreign objects and check for
damage.
K
Cultivating Tips
If you plan to use your tiller for cultivating:
• Plant rows on 20" - 22" centers for ease of turning.
• Set the drag bar with the pin in one of the higher holes. This will allow for shallow cultivation necessary to
turn over weeds, and break up and aerate the soil.
Questions? Call Toll Free at 1-800-737-2112
All manuals and user guides at all-guides.com
Caution must be taken in selecting tilling depth. If you attempt to
till too deeply for soil conditions, that is, with the drag bar in too
high a position, loss of control could result.
When removing material from the tines, stop engine and
remove spark plug wire first.
ENG - 16
WARNING
Copyright © 2016 MAT Engine Technologies, LLC
