Charging Process - ANSMANN AS10 LED Manual De Instrucciones

Brightness:
Max. luminous intensity:
Theoretical beam distance:
Operating time:
Protective class:
Additional functions:
Accessories included:

CHARGING PROCESS:

§ Before operating for the first time, the light should be fully charged.
§ The light should also be fully charged before being stored for a long period of time.
§ The following charging options are included:
- Via USB power supply at the socket (4): 100 - 240 V, 50/60 Hz.
- Via USB cable (5) directly to the computer, laptop etc. or in the car/truck.
§ Charging mode: CCCV with fourfold safety shutdown (short circuit, over charging, deep discharging,
over load)
§ For charging, insert the search light into the charging station (3), which must be connected either to
a socket via the USB power supply or to a secondary device/car cigarette lighter socket via the USB
cable.
§ Charging status indication via DUO-LED (6):
- Battery is fully charged
- 0% - approx. 30%
- Approx. 30% - approx. 70%
- Approx. 70% - 100%
§ Discharging status indication via DUO-LED (6):
- 100% - ca. 75%
- Approx. 75% - approx. 15%
- Approx. 15% - 0%
§ The search light recognizes when the battery pack is fully charged and cuts the power, so
overcharging is not possible.
§ The charging station and the USB power supply are only for use with ANSMANN AS10 LED
search lights.
100% light intensity
Up to 330 Lumen
Up to 105.000 Candela
Up to 650 m
Approx. 6 hours
IP54
Smooth focusing
Optional emergency light in case of a power failure
(Dependant on switch position)
[3] wall mount, [4] USB power supply AC, [5] USB cable,
[7] USB Car adaptor DC, [8] Carrying strap
LED flashes green
LED lights red
LED lights orange
LED lights green
LED lights green
LED lights orange
LED lights red
Deutsch | English | Français | Español | Svenska
Nederlands | Dansk | Čeština | Slovenský
20% light intensity
Up to 70 Lumen
Up to 22.000 Candela
Up to 300 m
Approx. 13 hours