Charging Process - ANSMANN AS 10H plus Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
GB
portAbLe SeArcH LigHt AS 10H
before operAting tHe LigHt reAd tHe operAting inStructionS!
tecHnicAL dAtA:
> Lamp components:
Main lamp:
Energy-saving lamp:
> Battery:
> Charging time:
> Operating time:
Halogen main lamp
4 LED
> Protection class
> Protective system:
> Operation/storage temperature:

cHArging proceSS:

> Before operating for the first time, fully charge the lamp.
> fully charge the lamp, before putting away in storage for a longer period of time.
> Charging options:
Plug power pack:
Automotive charging plug:
note: Make certain that the cigarette lighter also remains volt-carrying when the ignition key is removed.
Should this not be the case, then the charging lead should be connected through a 3 A fuse directly to the
vehicle battery!
The charging status is indicated by a 3 colour LED:
> LED lights ORANGE: Battery is in pre-charge mode
> LED lights RED: Battery is fast charging
> LED lights GREEN: Battery is trickle charging
> LED flashes RED-GREEN: The condition of the battery is under test. (This test can last up to five minutes. If the
LED display has not changed to ORANGE after 5 minutes then the rechargeable battery is probably defective).
> To preserve the charge, the lamp should always be parked in the wall bracket when it is not being used.
Self-discharge and the related reduction of the capacity of the storage battery is avoided in this way. The portable
search light is equipped with an automatic voltage charge monitor Ô permanent charge is possible!
operAting tHe portAbLe SeArcH LigHt:
Press operation selection control push button 1 x: The main lamp is switched on
Press operation selection control push button 2 x: Energy saving lamp (4 LED) is switched on
Press operation selection control push button 3 x: The main portable search light is switched off
The energy saving lamp (LED) is automatically activated when the filament of the main lamp break and before
the deep discharge protection is activated.
One can manually switch over to the energy saving lamp (4 LED) before the final discharge voltage is reached
(remaining light duration > 2 h).
The portable search light switches itself off as soon as the final discharge voltage is reached.
Halogen 6V, 6 W.
4 LED, operating life > 100,000 h.
6xAA NiMH, 7.2 V, 2100 mAh, rechargeable.
3 – 3.5 h.
approx. 3 h afterwards possible switch-over to 4 LED > 2 h
approx. 120 h
II.
IP44.
–20°C - +50°C.
100-240V, 50/60 Hz.
12 V-24 V DC (max. 2 A).
plus
Tabla de contenido
loading

Tabla de contenido