Instructions For Use; Introduction; Applications; Properties - Marmitek TMD4 Modo De Empleo

INSTRUCTIONS FOR USE

INTRODUCTION

Congratulations on buying the MARMITEK X-10 MicroModule
TMD4.
Because of the extreme small dimensions the module can be built in
behind built-in switches and wall sockets (minimal built-in depths 40
mm, advise 50 mm) The module is also ideal to build in lighting
armatures and for placing in small rooms as for instance lowered
ceilings. Applicable universally: completely freedom of choice in the
make, colour and model of switch material.
Please note: due to heat generation, apply no more than one
module per flush socket / central socket!

APPLICATIONS

• Remote control in switching ON/OFF and DIMMING of lighting.
• Makes it possible to use existing momentary switches as a
X-10 transmitter for controlling Marmitek X-10 lamp modules.
• Control all your X-10 lamp modules by momentary switches.
• Applicable universally: completely freedom of choice in the
make, colour and model of switch material.
• Place your X-10 lamp modules out of sight.
• Ideal for installation on places where there is little room
available.
• Use standard switches on a stationary location to activate
Macros.
• Installing hotel switches/ interchange switches without wires
between switches (MicroModule relays status to another
MicroModule).

PROPERTIES

• Very small (46 x 46 mm and only 16 mm thick).
• Two-way X-10 communication.
• On the TMD4 momentary switches are connected.
TMD4™ 7