Idiomas disponibles
Idiomas disponibles
Atmospheric pressure
Language
10.0 Troubleshooting
If your GPS navigator fails to work, please check it following the solutions below. If the problem still
exists, please contact our customer service center.
Failures
The device does not turn on
The device turns off
during use
The device fails to display;
The display contents are
not clear
No right actions occur on
clicking the button
There is no sound while
playing
The device cannot access a
computer
The device cannot receive
the GPS signals
The map data is missing
inadvertently
86 kPa ~ 106 kPa
Spanish, Portuguese, English,etc.
Causes
The battery energy is
insufficient
The batter switch is off
The battery energy is
insufficient
The back light brightness
is too low, The back light is
turned off automatically
The touch screen is not
calibrated.
The volume is set too low
The earphone is in poor
contact
The USB cable fails to
connect
-
-
Solutions
Power the system with external power source and charge the battery at
the same time
Switch upward the battery switch
Power the system with external power source and charge the battery at
the same time
Adjust the brightness using the touch pen to click the LCD screen. The
back light will be on again
Calibrate the touch screen again
Increase the volume
Plug the earphone properly
Connect the USB cable properly
It depends on whether local GPS satellite signals are strong or weak. Wait
for three minutes above to receive signals
1. There are map files stored in the disk.
2. Contact your agent or dealer to ask for a password that is required
when the navigation function is activated again.
multilaser
www.
com.br
.
69
