Idiomas disponibles
Idiomas disponibles
2) Connect the other end to vehicle cigarette lighter to power and charge the GPS navigators at the
same time.
[Caution] Please plug the vehicle adapter after the car is started, avoiding damages to the navigator
caused the instant current at start time.
2.3 • Basic Operation
2.3.1 • Switching on/off
Please press power key
system enters state of dormancy. When you switch on again, the device will maintain the operation status
last time you switch off.
[Note] If you want to save battery energy, you may switch downward the switch to cut off the main
power supply.
2.3.2 • Restarting the system
When the system have no response, press power switch key to shut the system and restart the system.
[Reference] The following cases may cause system failure:
1) Delay and stagnation occur while switching over images;
2) Overlong running time fails to activate the click function;
3) Pressing the power key fails to switch on/off the device.
[Caution] If the system fails, you will miss the system information not yet saved by restarting the
system. Please backup the data regularly.
2.3.3 • Using the vehicle bracket to fix a navigator
A vehicle bracket is composed of a bracket and a support. Please fix the device using the vehicle
bracket onto the front windshield or dashboard while using the GPS navigator in vehicle.
[Caution] Place the vehicle bracket carefully. Ensure the GPS navigator would not block your driving
vision. Ensure the navigator is fixed instead of being placed randomly. Do not fix it where the air bag is
placed. Do not place it within the bag's inflation range.
2.3.4 • Using a touch pen
The touch pen is used to operate the GPS navigator. Please keep it well.
1) Click: Click the screen once with the nib.
on the top of the navigator to switch off when you finish application. The
multilaser
com.br
www.
.
45
