Hilti SIW 22T-A 3/4 Manual De Instrucciones Original página 16

▶ Set the forward / reverse selector switch to forward or reverse rotation.
5.1.6 Installing an accessory tool
1
SIW 22T-A / "
2
CAUTION
Risk of injury through use of the wrong type of accessory tool!
▶ Use only accessory tools of the locking type.
▶ Do not use worn or damaged accessory tools.
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Line up the hole in the accessory tool with the half ball in the square drive
spindle.
3. Push the accessory tool on to the product's square drive spindle.
▶ The accessory tool snaps into engagement.
5.1.7 Removing the accessory tool
1
SIW 22T-A / "
2
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Pull the accessory tool off the square drive spindle.
5.1.8 Installing an accessory tool
3
SIW 22T-A / "
4
CAUTION
Risk of injury through use of the wrong type of accessory tool!
▶ Use only accessory tools of the locking type.
▶ Do not use worn or damaged accessory tools.
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Remove the O-ring from the groove in the accessory tool.
3. Pull out the locking pin.
4. Set the O-ring on the product's square drive spindle.
5. Push the accessory tool on to the product's square drive spindle.
Position the accessory tool with the hole in the shank of the accessory
tool aligned with the hole in the square drive spindle.
6. Insert the locking pin into the accessory tool.
7. Then re-insert the O-ring into the groove in the accessory tool.
10 English
4
5
6
2153646
*2153646*