Krampouz BECIF2 Manual De Instrucciones página 11

Idiomas disponibles

Idiomas disponibles

Technical description
CHARACTERISTICS
A stainless steel water container.
Stainless steel exterior
Four rubber legs
A thermostat,
adjustable from 50 to 100°C
An On/Off button
A power cable for a 16 amp socket
This appliance can be used with two, three or four stainless steel gastronorm containers 1/6 depth 150 mm
depending on the model, sold separately.
This appliance complies with the CE European Directives.
Installation
WORK SURFACE
Choose a clean work surface on which to place this appliance. A minimum distance of 5 cm should be kept
between this and non-heat-resistant surfaces. For optimum user comfort, the appliance must be located between
85 and 95 cm from the ground.
ELECTRICAL CONNECTION
This appliance must be connected to a single-phase 220-240 volt network, a two-pin socket + an earth contact of
16 amps. It is shipped with a power cable type HO7RNF with 3 conductors (phase + neutral + earth) of 1.5mm²
section.
Use
Never use this appliance without water.
Cleaning with soappy water is recommended before the first use.
To start, pour a volume of water into the container corresponding to the two arrows on the inner walls. If
necessary, you may top-up the water while in use.
Turn on and set the thermostat to the desired temperature based on your ingredients.
To keep the garnishes at a more consistent temperature, cover the container with a lid.
This appliance is designed to keep the preparations warm.
Maintenance and cleaning
Before cleaning your appliance, unplug it and let it cool.
Refer to the general requirements concerning electrical equipment before using this appliance.
Regularly empty the container after use in order to clean it and avoid a build-up of scale.
Clean the frame and the pot with a soft sponge soaked in warm water and liquid detergent without bleach.
Never use abrasive products or metal brushes for cleaning.
All manuals and user guides at all-guides.com
- 11 -
loading