Beurer LR 200 Instrucciones De Uso página 19

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
If you wish to change the combi filter at specific personal intervals (e.g. every six months), there is a
sticker on the upper edge of the combi filter on which you can enter, for example, the date it was inser-
ted or changed.
7. Cleaning and storage
WARNING
Before cleaning, always ensure that the mains plug of the air cleaner has been properly
disconnected.
7.1 Cleaning the filter
Regular cleaning of the filter (once a month) is a prerequisite for hygienic and fault-free operation.
• Clean the three-layered filter using the brush attachment of a vacuum cleaner. To carry out a thorough clean,
pull out the pre-filter and clean the activated carbon filter located behind it and the EPA filter located at the
rear, also using the brush attachment from a vacuum cleaner. Then replace the pre-filter on the EPA filter.
Activated carbon filter
IMPORTANT
The three-layered filter should be changed after 4320 operating hours (see "Filter change" section).
The three-layered filter cannot be washed.
7.2 Cleaning the housing
Clean the housing of the air cleaner with a damp cloth (water or a mild cleaning solution). When cleaning, do
not use any solvents or other aggressive or abrasive cleaning agents, as the surface may become damaged.
7.3 Storage
If you do not plan to use the device for a long period of time, we recommend that you clean it and store it in
the original packaging in a dry environment, ensuring it is not weighed down by additional items.
Front
EPA filter E 12
19
Rear
loading