Troubleshooting; Technical Specifications - Klarstein 10020109 Manual De Instrucciones

PROBLEM
Symbol " Symbol " " fl ashs. " fl ashs.
Symbol " Symbol " " display in " display in
LCD display window. LCD display window.
Ice cubes stick together.
Ice making cycle is
normal but no ice is
made.
Technical specifi cations: 220-240V 50/60Hz 2200W
Hints on Disposal
According to the European waste regulation 2002/96/EC this symbol on the product or
on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electri-
cal and electronic equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your local
council or your household waste disposal service.
Declaration of Conformity
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)

Troubleshooting

POSSIBLE CAUSE
Lack of Water.
There is too much ice.
The ice cycle is too long.
Water temperature in inner
tank is too low.
Ambient temperature or
water temperature in inner
tank is too high.
Refrigerant in cooling
system leaks.
Pipe in the cooling system
is blocked.
Technical Specifi cations
SOLUTION
Stop the ice maker, fi ll water, and press
"ON/OFF" button again to restart the unit.
Remove ice from ice basket.
Stop the ice maker, and restart it when the
ice blocks melt. Select the small size ice cube
selection.
Change the water in the inner Tank.
Temperature of water is better set between
8-32℃
Please run the ice maker below 32℃ and pour
colder water into tank.
Verify by a qualifi ed technician.
Verify by a qualifi ed technician.
12