Makita HG6031V Manual De Instrucciones página 7

Do not strip metal window frames, as
the heat may be conducted onto the
glass and crack it. When stripping
other window frames, use the glass
protection nozzle.
Do not keep the tool directed at one
spot too long to prevent igniting the
surface.
Avoid collecting paint on the scraper
accessory, as it may ignite. If neces-
sary, carefully remove paint debris
from the scraper accessory using a
knife.
Stationary use
This tool can also be used in stationary mode.
Place the tool onto a stable workbench.
Q
Secure the cable to prevent pulling the tool off the
Q
workbench.
Carefully switch the tool on.
Q
Make sure that the nozzle always
points away from you and any
bystanders.
Make sure not to drop anything into
the nozzle.
Cooling down
The nozzle and accessory become very hot during use.
Let them cool down before attempting to move or store
the tool.
To reduce the cooling time, switch the tool on at
Q
the lowest air temperature setting and let it run for
a few minutes.
Switch the tool off and let it cool down for at least
Q
30 minutes. Always place it vertical and standing.
MAINTENANCE AND CLEANING
Attention:
work on the equipment, pull the
power plug.
Maintenance
Your Power Tool has been designed to operate
Q
over a long period of time with a minimum of
maintenance. Continuous satisfactory opera-
tion depends upon proper tool care and regular
cleaning.
If the supply cord is damaged, it must be replaced
Q
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Lubrication
Your power tool requires no additional lubrication.
Q
Cleaning
Keep the ventilation slots clear and regularly clean
Q
the housing with a soft cloth.
Cleaning
Keep the ventilation slots of the machine clean to
Q
prevent overheating of the motor.
before performing any
Regularly clean the machine housing with a soft
Q
cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
Q
If the dirt does not come off use a soft cloth moist-
Q
ened with soapy water.
Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may damage the plastic
parts.
TECHNICAL DATA
Model
Voltage Power
No:
110V~ 1300W
HG5030 120V~ 1500W
220-240V~ 1600W
110V~ 1300W
HG6030 120V~ 1500W
220-240V~ 1800W
110V~ 1300W
HG6031V 120V~ 1500W
220-240V~ 1800W
Temperature (HG6031V)
Voltage 110V~
On/off switch I
1 50°C
2 70°C
3 100°C 150°C 100°C 150°C 120°C 200°C
4 120°C 200°C 120°C 200°C 150°C 250°C
Dial 5 150°C 250°C 150°C 250°C 200°C 300°C
6 200°C 350°C 200°C 350°C 250°C 400°C
7 250°C 450°C 250°C 450°C 300°C 500°C
8 300°C 500°C 300°C 500°C 350°C 550°C
9 350°C 550°C 350°C 550°C 400°C 600°C
NOTE: Each temperature value is for reference
only since it changes depending on the ambient
temperature.
7 English
Overall
temperature air flow
length
I 400°C 200L/M
II 550°C 400L/M
I 400°C 200L/M
233mm 0.56kg
II 550°C 400L/M
I 350°C 300L/M
II 500°C 500L/M
I 50°C 200L/M
II 350°C 200L/M
III 550°C 400L/M
I 50°C 200L/M
II 350°C 200L/M 233mm 0.57kg
III 550°C 400L/M
I 50°C 250L/M
II 300°C 250L/M
III 600°C 500L/M
I 200L/M
II 400L/M
I 200L/M
See below
257mm 0.67kg
II 400L/M
I 250L/M
II 500L/M
120V~ 220-240V~
II I II
80°C 50°C 80°C 50°C
100°C 70°C 100°C 100°C 150°C
Net
weight
I II
100°C