Bosch 2800 RE Manual Original página 21

OBJ_BUCH-318-003.book Page 21 Friday, November 19, 2010 4:36 PM
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for hammer drilling in
concrete, brick and stone, as well as for light
chiselling work. It is also suitable for drilling
without impact in wood, metal, ceramic and
plastic. Machines with electronic control and
right/left rotation are also suitable for screw-
driving.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Quick change keyless chuck
(PBH 3000-2 FRE)
2 SDS-plus quick change chuck
(PBH 3000-2 FRE)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck
(PBH 3000-2 FRE)
7 Lock-on button for On/Off switch
8 On/Off switch
9 Thumbwheel for speed preselection
10 Rotational direction switch
11 Release button for mode selector switch
12 Mode selector switch
Bosch Power Tools
13 Gear selector (PBH 3000-2 FRE)
14 Release button for gear selector
(PBH 3000-2 FRE)
15 Button for depth stop adjustment
16 Wing bolt for adjustment of auxiliary handle
17 Auxiliary handle (insulated gripping surface)
18 Depth stop
19 Handle (insulated gripping surface)
20 Securing screw for key type drill chuck*
21 Key type drill chuck*
22 SDS-plus adapter shank for drill chuck*
23 Keyless chuck (PBH 2900 FRE/
PBH 3000 FRE Set)
24 Drill chuck mounting (PBH 3000-2 FRE)
25 Front sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
26 Rear sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
27 Extraction sleeve of the dust extraction
attachment*
28 Clamping screw for the dust extraction
attachment*
29 Depth stop of the dust extraction attach-
ment*
30 Telescopic pipe of the dust extraction
attachment*
31 Wing bolt of the dust extraction attach-
ment*
32 Guide pipe of the dust extraction attach-
ment*
33 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 T39 | (19.11.10)
English | 21