Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
9. Pour one pack of the glass rocks (K) over the
burner. Do NOT cover ignition screen with glass
rocks (K). Use a glove when handling glass rocks.
WARNING
DO NOT COVER THE IGNITION SCREEN when
placing the glass rocks into the fire bowl. Always
keep Ignition Screen visible. This screen must be
clear and free of obstructions at all times to insure
proper operation.
Screen
Do not place
glass rocks on screen.
Keep screen clear.
The edge of the burner must be covered by glass rocks
completely. Otherwise the flame may be extinguished occasionally.
See the Figure CORRECT and INCORRECT for reference.
CAUTION
GLASS ROCKS - Use a glove when handling glass rocks.
1. Do not light or use gas unit if glass rocks are wet. Make sure glass rocks are completely dry before lighting as intense heat could
cause the rock to crack.
2. Glass rocks could hit a person's face or eyes during the initial startup of this unit. Keep away from the appliance for the first 20
minutes after lighting.
3. Use only Pleasant Hearth / GHP Group, Inc. factory-authorized glass rocks. The use of any glass rock that is not factory-
authorized can be dangerous and will void your warranty.
4.
Do not add additional rocks to the fire bowl. Only 7.72 lbs /3.5 kgs are approved for safe use with this fire pit.
5.
Do not use two different sizes of glass rocks at the same time.
Do not mix glass rocks with lava rocks.
6.
9
CORRECT
INCORRECT
14
K
