MiLECTRIC RCM-231W Manual De Instrucciones página 38

Ocultar thumbs Ver también para RCM-231W:
Idiomas disponibles

Idiomas disponibles

installation
location
When selecting a location for your refrigerator/freezer
you need to make sure that
the floor is flat and firm, and the room is well ventilated with an ambient temperature of
between 10°C and 43°C. Avoid locating your refrigerator/freezer near a heat source, for
example.
Kitchen, boiler or radiator. Also avoid sunlight. If you are placing your
refrigerator/freezer in a place like a garage or an annex make sure that the
refrigerator/freezer is placed above the moisture course, otherwise condensation will occur
in the refrigerator/freezer cabinet. Never place the refrigerator/freezer in a wall hole or in
closets or furniture. When your refrigerator/freezer is working, the grill on the back can
make the sides hot and warm. Therefore, it should be installed so that the back of the
refrigerator/freezer has at least 9cm (31/2") of free space and the sides have 2cm (3/4").
Do not cover the refrigerator/freezer with any cover.
level
If the refrigerator/freezer is not level, the door and magnetic alignment of the seal are wrong
can cause the refrigerator/freezer to work improperly. Once the refrigerator/freezer is
placed in its final location, adjust the
leveling feet at the
front by turning them.
Clean before
using
Clean the inside of the
fridge/freezer
with
a weak solution of baking soda.
loading