-
The system will automatically revert
back to display the previous temper-
ature setting if there is no operation
in a five seconds period.
- Turning the unit ON or OFF at any
time or adjusting the timer setting
to 0.0 will cancel the Auto Start/
Stop timer program.
-
When the malfunctionoccurs, the
Auto Start/Stop timed program
will also be cancelled.
-
When the unit is off, press the Timer
button to initiate the Auto-on start
program,press it again within five
seconds will initiate the Auto-off stop
program.
-
Press or hold the UP or DOWN
button to change the Auto time by
0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24
hours. The control will count down
the time remaining until start.
Swing automatically
Fig.4
OPERATING INSTRUCTIONS
SLEEP/ECO operation
Press this button, the selected temperature will
increase(cooling) or decrease(heating) by
O
O
O
1
C/2 F(or 1 F) 30 minutes.The temperature will
then increase (cooling) or decrease (heating) by
O
O
O
C/2 F(or 1 F) after an additional 30
another 1
minutes. This new temperature will be maintained
for 7 hours before it returns to the originally
selected temperature. This ends the Sleep/Eco
mode and the unit will continue to operate as
originally programmed.
NOTE: This feature is unavailabe under FAN or
DRY mode.
Other features
Auto-Restart(on some models)
If the unit breaks off unexpectedly due to the
power cut,it will restart with the previous
function setting automatically when the
power resumes.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not be restarted
operation in the first 3 minutes. This is to protect
the unit. Operation will automatically start after
3 minutes.
Air flow direction adjustment
The louver can be adjusted automatically .
Adjust the air flow direction automat ically
(Fig.4):
When the Power is ON, the louver opens fully.
Press the SWING button on the panel or
remote controller to initiate the Auto swing
feature.
The louver willl swing up and down
automatically.
Please do not adjust the louver manually.
8