Idiomas disponibles
Idiomas disponibles
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
The unit can be controlled by the mobile phone unit control panel alone or with the
remote controller .
OPERATION PANEL OF THE AIR CONDITIONER
WiFi Button
This button to initiate the WiFi
connection mode.
For the first time to use WiFi function, press
the WiFi button for 3 seconds to initiate the
WiFi connection mode.
The LED DISPLAY shows 'AP' to indicate
you can set WiFi connection. If connection
(router) is successful within 8 minutes, the
unit will exit WiFi connection mode
automatically and the WiFi indicator
illuminates. If connection is failure within
8 minutes, the unit exits WiFi connection
mode automatically.
For the further steps, please read
the WiFi User Manual to go forward
(
R
e
a
d
P
a
g
e 17-35).
NOTE: When you restart the WiFi function,
it may take a period of time to connect to
the network automatically.
POWER button
Power
switch on/off.
+
UP(
) and DOWN(
Used to adjust (increasing/decreasing)
tempe ratures ettings in 1 C /2F( or 1 F) inc rements
in a range of 17 C/62 F to 30 C/88 F (or 86 F)
or the TIMER setting in a range of 0~24hrs.
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.
MODE select button
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
AUTO, COOL, DRY, F AN and HEAT(cooling
only models without). The mode indicator
(3s activate ion)
-
) button
AIR CONDITIONER FEATURES
light illuminates under the different mode
settings.
FAN/ION button (ION is optional)
Control the fan speed. Press to select the fan
speed in four steps-LOW, MID, HIGH and AUTO.
The fan speed indicator light illuminates under
different fan settings.
NOTE: Press this button for 3 seconds to initiate
ION
feature.The ion generator is energized and will
help to remove pollen and impur ities from the air, and
trap them in the filter. Press it for 3 seconds again to
stop the ION feature.
TIMER button
Used to initiate the AUTO ON start time and
AUTO OFF stop time program, in conjuction
+ -
with the
&
buttons. The timer on/off
indicator light illuminates under the timer
on/off settings.
SLEEP(ECO)/FILTER button
Used to initiate the SLEEP/ECO operation.
NOTE: After 250 hours of operation, the
filter indicator light illuminates. This feature
is a reminder to clean the Air Filter for more
efficient operation. Press the sleep button
for 3 seconds to cancel the reminder.
SWING button
(Applicable to the models with auto swing feature only)
Used to initiate the Auto swing feature.
When the operation is ON, press the
SWING button can stop the louver at
the desired angle.
LED Display
Shows the set temperature in
O
F and the Auto-timer settings.
While on DRY and FAN modes, it shows
the room temperature.
C or
O
6
