Idiomas disponibles
Idiomas disponibles
• Do not fill liquid over MAX LIQUID FILL LINE. If too much
liquid is used, it will overflow. In this case, stop operation,
remove liquid to below MAX LIQUID FILL LINE and continue
processing.
Read this if assembling batch bowl parts to use slicing disc
or shredding disc assembly.
To assemble the adjustable slicing disc (WFP16S10), you
must remove bowl cover. Position the disc stem over the drive
shaft securely. Next, select the desired thickness setting on your
adjustable slicing disc. There are 16 different positions ranging
from 1–6 mm in thickness. Once you've set the thickness,
position the plastic receptacle on the underside of the disc over
the disc stem securely. Do not turn on the unit until the batch
bowl is properly assembled with the cover.
To assemble the reversible shredding disc (WFP16S12A), you
must remove bowl cover. Position the disc stem over the drive
shaft securely. Next, select the desired shredding blade size. Your
reversible shredding disc has fine shredding blades on one side
and coarse shredding blades on the other. Be sure the desired
blade size is facing up, and position the disc on the disc stem
securely. Do not turn on the unit until the batch bowl is properly
assembled with the cover.
NEVER ATTEMPT TO START THE FOOD PROCESSOR
WITHOUT THE COVER LOCKED INTO POSITION.
Two pushers for feed tube
There is a large food pusher and small food pusher. The large
pusher is for processing larger foods. The small pusher nests in
the large pusher and can be used for smaller products, guiding
long, thin vegetables for more precise cuts, or for jobs like slicing
pepperoni. Insert the small food pusher into the large food pusher
opening. Now you are ready to insert the large pusher into the
feed tube chute.
9
