M.-Nr. 11313351
A
Vorderwand mit 4 Schrauben M4 x 25 anschrauben, siehe Abb. 7.
de
en
Installation instructions for APCL plinth 15/30
Reason: Fitting a washing machine or tumble dryer on a plinth enables a more ergonomic height to be achieved.
Included parts
No.
Mat. no.
Designation
1
Plinth
2
Tensioning strip
4
Washer B6.4
2
Hexagonal bolt M6 x 30
4
Nut M6
4
Plug S12
4
Washer 8.4
4
Hexagonal-head wood screw 8 x 65
8
Washer 15 x 44 x 3
8
Underlay
2
Clamping plate
4
Raised-head screw CEM 6 x 12
2
Hexagonal bolt M6 x 20
1
Front panel (box plinth only)
2
Side panel (box plinth only)
12
Raised-head screw M4 x 25 (box plinth only)
Danger due to incorrect service and repair work
WARNING
Danger due to incorrect service and repair work
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety requirements must be taken into account.
A
Wear personal protective equipment.
A
First read the Miele service documentation, then commence work.
Measures to be carried out before commencing any service work on the appliance
- Carry out appropriate electrical safety checks.
- Disconnect all appliance utility connections in accordance with the operating instructions.
Measures to be carried out after service work has been completed
- Carry out appropriate electrical safety checks.
- Check the appliance for correct operation.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
7 von 50
12.05.2021
