M.-Nr. 11313351
A
Βιδώστε το μπροστινό τοίχωμα με 4 βίδες M4 x 25, βλέπε εικ. 7.
el
en-US
APCL 15/30 stand installation instructions
Reason: Installing a washer or dryer on a stand enables a more ergonomic height to be achieved.
Parts included
Quantity Mat. no.
Designation
1
Stand
2
Tensioning strip
4
B6.4 washer
2
M6 x 30 bolt
4
M6 nut
4
S12 plug
4
8.4 washer
4
8 x 65 wood screw
8
15 x 44 x 3 washer
8
Spacer
2
Clamping plate
4
CEM 6 x 12 raised-head screw
2
M6 x 20 bolt
1
Front panel (closed stand only)
2
Side panel (closed stand only)
12
M4 x 25 raised-head screw (closed stand only)
Danger due to incorrect service work
WARNING
Danger due to incorrect service work.
There is a risk of serious damage, injury, or even death if service work is carried out incorrectly.
A
Service work may only be carried out by a qualified service technician with specialist training, knowledge and
experience.
A
All applicable safety guidelines must be followed.
A
Wear personal protective equipment.
A
Read the Miele service documentation before starting service work.
Measures to be carried out before starting any service work
- Carry out appropriate electrical safety checks.
- Disconnect all machine utility connections in accordance with the operating instructions.
Measures to be carried out after service work has been completed
- Carry out appropriate electrical safety checks.
- Check the appliance for correct operation.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
17 von 50
12.05.2021
