Idiomas disponibles
Idiomas disponibles
Fig. 13
7. Turn the ON/OFF switch to the ON (I) position to start the
pressure washer (Fig. 14).
Fig. 14
8. When re-starting the motor, always keep the trigger
pressed.
NOTE: The motor only runs when the trigger is operated
and shuts off when the trigger is released.
Using Nozzles
Before beginning any cleaning task, determine the best nozzle
for the job. Each of the nozzles has a different spray pattern.
The nozzle patterns are 40˚ (for gentle cleaning), 15˚ (for tough
jobs) and 0˚ (for spot cleaning or hard-to-reach areas).
m
CAUTION!
NEVER change nozzles without locking the
safety lock on the trigger handle.
m
WARNING!
High-pressure jets can be dangerous if
subject to misuse. The jet must not be directed at persons,
pets, live electrical equipment, or the appliance itself.
This electric pressure washer is equipped with three Quick-
Connect nozzles that easily snap onto the Quick-Connect
collar of the spray wand.
To connect a nozzle to the spray wand:
1. Turn off the pressure washer and shut off the water supply.
2. Engage the safety lock on the trigger handle.
3. Pull back the brass Quick-Connect collar and insert the
Fig. 15
Trigger
To disconnect a nozzle from the spray wand:
ON/OFF
switch
1. Turn off the pressure washer and shut off the water supply.
2. Engage the safety lock on the trigger handle.
3. Pull back the brass Quick-Connect collar and remove the
m
the trigger is engaged. Doing so could result in damage to the
pressure washer or injury to the user.
Working with Detergents
When cleaning with the pressure washer, some cleaning tasks
can be solved with water alone, but for most tasks cleaning
with detergent allows for more effective dirt removal.
m
for use with pressure washers, such as Sun Joe
DECK WASH (SPX-HDC1G), Sun Joe
WASH (SPX-FCS1G), or Sun Joe
(SPX-APC1G). DO NOT USE household detergents, acids,
alkaline solutions, bleaches, solvents, flammable material, or
industrial grade solutions. These could damage the pressure
washer. Many detergents may require mixing prior to use.
Prepare the cleaning solution as instructed on the solution
bottle.
9
Pull the trigger to release the water pressure.
desired nozzle into the collar. Release the collar and the
nozzle will click into place (Fig. 15).
Quick-Connect
collar
Pull the trigger to release water pressure.
nozzle.
WARNING!
Do not make changes to the nozzle while
WARNING!
Use only detergents specifically designed
Nozzle
HOUSE +
®
SNOW FOAM AUTO
®
HEAVY DUTY CLEANER
®
