Idiomas disponibles
Idiomas disponibles
Operation
Comfortable SLEEP
Before going to bed, you can simply press the SLEEP
button and unit will operate in SLEEP mode and bring you
a sound sleep.
Operation Mode
1. In COOL, DRY mode
1 hours after SLEEP mode
starts, temp. will become 1 ºC
higher than temp. setting. After
another 1 hours, temp. rises by
1 ºC further. The unit will run for
SMART
further 6 hours then stops Temp.
HUMIDITY
AIR
is higher than temp. setting so
STATUS
that room temperature won't be
too low for your sleep.
SLEEP
operation starts
1 hr
1 hr
Temp. setting
In COOL, DRY mode
2. In HEAT mode
1 hours after SLEEP mode starts, temp will become
2 ºC lower than temp. setting. After another 1 hours,
temp decrease by 2 ºC further. After more another
3 hours, temp. rises by 1 ºC further. The unit will run for
further
7
Press SLEEP
button.
SLEEP
operation stops
Approx. 6hrs
Rises 1
C
º
Rises 1
C
º
Unit stop
3 hours then stops. Temp. is lower than temp. setting
so that room temperature won't be too high for your
sleep.
Temp. setting
1 hr
Decreases 2
1 hr
3 hrs
SLEEP
operation starts
In HEAT mode
3. In SMART mode
The unit operates in corresponding sleep mode, which
adapted to the automatically selected operation mode.
4. When quiet sleeping function is set to 8 hours the
quiet sleeping time can not be adjusted. When TIMER
function is set, the quiet sleeping function can't be
set up. After the sleeping function is set up, if user
resets TIMER function, the sleeping function will be
cancelled; the machine will be in the state of timing-
on, if the two modes are set up at the same time, either
automatically, and the other mode will be cancelled.
Power Failure Resume Function
not start running unless 3 minutes have elapsed. When
the power resumes after power failure, the unit will run
automatically, and 3 minutes later the compressor starts
running.
Note to the power failure resume:
enter function after hearing four sounds. And press the
this function after hearing two sounds.
Unit stop
C
º
Decreases 2
C
º
3 hrs
Rises 1
C
º
SLEEP
operation stops
